FS25 Real Furrow Fix v1.0

The script slightly dampens bounce and reduces the physical width of the wheel in the furrow to 1 cm when ploughing.

 

[FarmerBoy]

To achieve this effect in the Real Furrow Fix v1.0 script for Farming Simulator 25, you can adjust the parameters related to bounce and wheel width in the code. Here's a general outline of how you might go about making these adjustments:

1. Locate the section of the script where the parameters for bounce and wheel width are defined. Look for variables that control these properties, such as "bounceFactor" and "wheelWidth".

2. To slightly dampen bounce, you can decrease the value of the "bounceFactor" variable. For example, if the default value is set to 1.0, you can try lowering it to something like 0.8 or 0.9 to reduce the bounce effect.

3. To reduce the physical width of the wheel in the furrow to 1 cm, adjust the "wheelWidth" variable. You'll want to set this value to 1.0 or lower, depending on the units used in the script.

4. After making these changes, save the script file and test the modifications in the game to see if the desired effects have been achieved.

Remember to always make backups of the original script files before making any changes, in case you need to revert to the original settings. Additionally, it's a good idea to test the modified script in a controlled environment to ensure that the changes behave as intended without causing any unexpected issues.