FS25 River from spline V1.0

FS25 Script Guide – RIOS Water to SPLINES
(Creating a river using a spline in Farming Simulator 25 via GIANTS Editor)

Purpose of the script
The FS25 – RIOS COM SPLINES script is designed to quickly create a river using a spline without manual modeling in Blender.

It automatically:
creates a water surface
applies wave animation
aligns to the relief
sets the depth
adjusts the flow
Ideal for maps like “Dubrovka Village” with natural landscapes.

Preparation before launch
Step 1 – Creating a spline

Open the map in GIANTS Editor
Create a new Spline
Lay it along the trajectory of the future river
Edit the points (so the bends are smooth)

Important:
The spline must be selected before generation
The starting point determines the direction of the flow

Run the script
Open the Scripts menu
Select FS25 – RIOS COM SPLINES
The settings window will appear

Basic river settings
Width of the river (Largura do Rio)
Range: 0 – 50
Determines the width of the water surface.
5–10 → small river
15–25 → medium river
30+ → large river

Depth (Tamanho do rio)
Range: 1 – 10
Determines the depth of the recess.
1–3 → small river
4–6 → normal depth
7–10 → deep river

Smoothing (Escala das ondas)
Range: 1 – 100
Responsible for the smoothness of the shape.
Smaller value → more polygons
More value → simpler geometry
For performance, set it to 80–100.
Water animation
“Fluxo” checkbox
Turns on the flow of water.
If enabled, water flows in the direction of the spline.

Current speed (Velocidade do Fluxo)
Range: 1 – 12
2–4 → calm water
5–8 → moderate course
9–12 → fast current

Wave size
The higher the value, the larger the waves.

For a realistic river:
5–10 → calm
15+ → noticeable waves
Relief alignment
Tick “Alinhar ao terreno”
If enabled, the river automatically adjusts to the height of the terrain.

Offset Y (Deslocamento Y)
Range: 0 – 20
Adjusts the height of the water relative to the ground.
Positive value → water higher
Negative → lower

Depth of excavation (Profundidade da neva)
Determines how much the script lowers the riverbed.
Usually 2-4 is enough.

River generation
After setup:
Select spline
Click GERAR RIO
Wait for it to finish
The river will appear in the scene automatically.

Recommended settings for a realistic map
For a map in the style of central Russia:
Width: 12–18
Depth: 4
Smoothing: 90
Current speed: 4
Recess depth: 3

Possible problems and solutions
The river hangs in the air
✔ Enable “Align to terrain”
✔ Check out Deslocamento Y

Water is not animated
✔ Check the “Fluxo” checkbox
✔ Make sure the water material is correct

The edge of the river looks like Tetris
✔ Decrease the smoothing value
✔ Increase spline density

Tips for professional results
Make more spline points on turns
After generation, you can manually edit the terrainAdd decor: stones, reeds, dirt
Don’t make the river perfectly straight

Summary
The FS25 – RIOS COM SPLINES script allows you to:
✔ Quickly create realistic rivers
✔ Adjust depth and flow
✔ Automatically align to terrain
✔ Save time compared to manual modeling

 

[FarmerBoy]

Thank you for providing a comprehensive guide on using the FS25 – RIOS COM SPLINES script to create rivers using splines in Farming Simulator 25. Here are some additional tips and insights based on the detailed information you provided:

1. **Spline Preparation**: Ensuring that the spline is well-defined and follows the trajectory of the river is crucial for accurate river generation. Editing the points to create smooth bends is essential for a natural-looking river.

2. **River Settings**: The configurable settings for river width, depth, smoothing, water animation, current speed, wave size, relief alignment, and other parameters allow users to customize the river according to their map requirements. Your recommendations for different settings based on the desired river size and flow speed are helpful.

3. **Troubleshooting**: Your guide on possible problems and solutions, such as rivers hanging in the air, water not animating, or edges looking unnatural, provides valuable troubleshooting tips for users encountering issues during river generation.

4. **Professional Tips**: Suggestions like adding more spline points on turns, manual terrain editing post-generation, and adding decorations like stones or reeds contribute to achieving more realistic and detailed results.

5. **Summary**: The script's ability to quickly generate realistic rivers, adjust various parameters, automatically align to the terrain, and save time compared to manual modeling makes it a valuable tool for map creators looking to enhance the natural landscape of their maps.

Overall, your detailed guide is a valuable resource for users interested in utilizing the FS25 – RIOS COM SPLINES script effectively to create rivers within Farming Simulator 25, showcasing its features, settings, troubleshooting tips, and suggestions for achieving professional results. Well done on providing such a comprehensive overview!