FS25 New Holland Pack V1.0.8

This pack contains a New Holland CX 7.70, a Varifeed 28ft, a varifeed 41ft & a maize header.
The New Holland Pack contains:
A New Holland CX7.70 with many realistic Interactive Points,
A Varifeed 28ft header, which also has IC points,
A Varifeed 41ft, also with IC points & a corn dentition.
CX 7.70 :
IC Outside: Move straw chopper forward/backward, fold ladder in/out, attach/remove PTO guard on the left side & attach/remove front protective shield.
IC Inside: Fold the ladder on/off, switch all monitors on/off, switch the main monitor between 4 displays (which also have IC points), turn the rotating beacon on/off, turn the front-rear tube light on/off, let the windshield wiper wipe once, open/close the grain tank, start/stop the engine, turn the threshing drum (header) on/off, fold the tube in/out.
Configurable in the shop: New Holland logos, warning LEDs, additional LEDs on the sides, anti Claas – John Deere- Case decals, DjB decals (give price discount), advertising on the roof (Häckterjäger, DjB [price discount] Forbidden mod [price discount]) or New Holland, tires, straw chopping width [between 9.15m and 12m], warning signs, pipe length [small, medium; large], passenger, rotating beacon, tiger decal, door sticker, cool box, warning LEDs on the warning sign & size of the grain tank
Varifeed28ft: 8.5 meters
In the shop: Old crop dividers, rapeseed tables, new crop dividers, and Claas, Case, Fendt, John Deere, New Holland (with blue logos), and New Holland (with new logos) livery. LED DJB decals.
IC: Folding/unfolding old stalk dividers, attaching/removing knife guards on the rapeseed table.
Varifeed41ft
12 meter working width
In the shop: Old straw dividers, rapeseed table, new straw dividers & logos.
IC: Folding/unfolding old stalk dividers, attaching/removing knife guards on the rapeseed table.
Corn Claw: Standard out of the game.
V1.0.8.0
New on the thresher: Pipe end now adjustable via mouse control with sound and visible hydraulics (hydraulics were installed according to the screenshots),
Tire pressure control system installed with its own sound (when you deflate you can hear escaping air, when you pump it up you can hear a compressor). The mod tire pressure control system is required here,
Yes/No switches were introduced in the shop for configurations where there are only two options to choose from.
Beacons have been added. The following can be selected: 3 large rotating lights, 3 large flashing LEDs, 3 small rotating lights, 3 small flashing LEDs, / only 2 large rotating lights (rear + in the middle of the roof)
New on the Varifeed41ft: rotating lights (selectable like on the thresher),
Sound when you push the rap table forward/back
New IC point to attach/remove the ear lifters (with a ratchet sound + own image as IC point) can only be used with configuration: stalk divider/old stalk divider & mounting kit,
Sound when you: fold/unfold the old stalk dividers, remove/install the knife guard from the rapeseed knives,
Animation of the cutting mechanism takes a little longer to switch off after switching off in order to show the swing more realistically, fourth configuration option called attachment kit,
New in the pack: The attachment kit is the new and fourth configuration option in the NEW HOLLAND PACK. It consists of the following parts: rapeseed table, stalk divider and old stalk divider, and allows these to be coupled/uncoupled. This means you can buy your Varifeed41ft in the shop with the configuration attachment kit, which includes a coupling point. At this coupling point you can connect the separate stalk dividers/old stalk dividers and the rape table available in the shop, which also have sounds and animations. The whole thing is not yet fully developed. Small errors are known, such as physics errors. In the shop, the attachments slipped through the floor. You can buy these and see them at the dealer and can also connect/disconnect them. Unfortunately I can’t really get this “physics” error under control. If there is a modder who would like to tackle this, please feel free to contact me. The 2 log warnings are also known, which indicate animation errors. they are not bad and can be ignored. The animations still work. Here too, if there is a modder who has the time and desire to tackle it, please feel free to get in touch.
Fixes & other: Unnecessary files & folders have been removed which makes the pack a little smaller (currently 161MB approx.).
Required mods:
Interactive control
RealGPS
Mercedes-Benz Trucks Pack

 

[FarmerBoy]

Thank you for sharing such a detailed description of the New Holland Pack V1.0.8 for FS25! This pack seems to bring a lot of realistic and interactive features to the game, enhancing the gameplay experience for users. Here are some of the key features that stand out from your description:

1. **New Holland CX7.70**:
- The harvester comes with various interactive points both on the outside and inside, allowing for detailed control over different parts of the machine.
- In-cabin controls include options to fold the ladder, switch monitors and displays, control lights, wipers, engine, threshing drum, grain tank, and more.
- Customizable configurations in the shop include logos, decals, lighting, warning signs, pipe length, passenger seat, and more.

2. **Varifeed 28ft & Varifeed 41ft Headers**:
- Both headers feature interactive controls for folding/unfolding stalk dividers and knife guards on the rapeseed table.
- Various shop options for crop dividers, livery designs, and logos.
- New features like rotating lights, sound effects, and additional IC points for attaching/removing ear lifters.

3. **Corn Header**:
- Standard corn claw header included in the pack.

4. **Updates in V1.0.8.0**:
- Adjustable pipe end with mouse control and hydraulic animations.
- Tire pressure control system with sound effects.
- Introducing yes/no switches for simplified shop configurations.
- Addition of beacon lights with selectable options.

5. **New Features on Varifeed41ft**:
- Sound effects for rap table movement and maintenance tasks.
- New IC points for attaching/removing ear lifters and other components.
- Animation improvements for a more realistic experience.
- Introduction of the attachment kit as a new configuration option, allowing coupling of different parts for added functionality.

It's impressive to see the level of detail and functionality that this pack offers to players. The constant updates and improvements show the commitment to enhancing the user experience. Thank you for sharing this information with the community!