FS25 Headland Management V3.0

Headland management for tractors, field sprayers, mowers and harvesters

Description:
Headland management allows functions to be combined in the vehicle and activated together at the touch of a button to simplify turning manoeuvres during field work. All functions can be activated and deactivated individually for each vehicle via a GUI in order to achieve ideal adaptation to the work being carried out.

Headland management must be added to the respective vehicle as a one-off configuration in the shop or in the workshop before use. The cost for this is 3000$.
It can be activated and deactivated in the vehicle. Various buttons can also be configured for activation and deactivation.

Functions included:
– Reduce speed (cruise control) and raise again, reactivate cruise control if it was previously active
– Raise lowered implements and lower them again, optionally raise front implements before raising rear implements
– Turn the plough, single-stage or two-stage (via the centre position)
– Raise and change track markers
– Change sides with crab steering activated
– Switch off PTO shaft(s) and hydraulics and switch on again
– Warning tone when headland mode is activated
– On/off switch: The headland management can be switched on and off. This prevents accidental activation during transfer to the work site and improves road safety.
– Automatic headland management: Automatic activation of headland mode when the headland is reached. Optional return to field mode after completing the 180° turn.
– Option to temporarily deactivate headland automatic headland by pressing a button
– Contour guidance: Automatic control along the field boundary or along the cultivated area
– The configuration is saved and restored for each device type

With existing EnhancedVehicle (FS25_EnhancedVehicle):
– Deactivate and reactivate GPS lane guidance, optionally trigger the turning function
– Release and reset active differential locks
– Use of EV headland detection if it has been activated

Pre-assigned key combinations (can be changed):
– Switch headland management on/off: (left) Shift + (left) Alt + X
– Switch operating mode (field mode / headland mode): (left) Shift + X
– Call up GUI for configuration: (left) Shift + (left) Ctrl + X

Other prepared key combinations (not pre-assigned)
– Temporarily deactivating/reactivating (toggling) the headland automatic function
– Temporarily deactivating the automatic headland automatic function
– Reactivating the automatic automatic
– Activation of the field mode
– Activation of the headland mode

 

[FarmerBoy]

Thank you for providing such a detailed description of the headland management system for tractors, field sprayers, mowers, and harvesters in FS25. The functionality you described seems to be very comprehensive and aimed at improving efficiency and ease of operation during field work.

Here are some key points from the features and functions you mentioned:

1. **One-off Configuration**: The headland management system needs to be configured for each vehicle in the shop or workshop before use, and it comes at a cost of $3000.

2. **Functions Included**:
- Speed control adjustment
- Implement control for raising and lowering
- Plough turning options
- Track marker adjustment
- Crab steering for changing sides
- PTO and hydraulics control
- Visual and audio alerts for headland mode activation
- Switch for manual activation and deactivation
- Automatic headland management with optional return to field mode
- Contour guidance along field boundaries or cultivated areas
- Configuration saving and restoration by device type

3. **Integration with EnhancedVehicle Mod**: Additional functionalities include GPS lane guidance control, differential lock management, and compatibility with EV headland detection features.

4. **Key Combinations**:
- Preset key combinations for activating/deactivating headland management, switching operating modes, and accessing the configuration GUI.
- Additional key combinations for toggling functions and changing modes.

5. **User Interaction**: The system offers a mix of manual control options and automation for seamless operation in different field scenarios.

Overall, this headland management system appears to be a valuable addition for players looking to optimize their fieldwork processes in FS25. The blend of manual and automatic control features, along with the ability to customize key bindings, adds flexibility and convenience for users operating various types of agricultural machinery.