FS25 Automatic Tramline System V1.2

Changelog 1.2.0.0:
Courseplay support added with new mode “Courseplay”
Enhanced Vehicle GPS support added with new mode “Enhanced Vehicle GPS”
Help page added in the ESC menu where you can read what each mode does and how it works, including a graphic for tramline distances
Two hectare counters added, one of which can be reset — a key must be assigned for this
The HUD has been removed from the F1 display and added as its own HUD, as it caused too many problems
The HUD can be moved and closed with the mouse and reopened with the mouse cursor toggle key
The values and HUD position are now saved
Manual mode renamed to Semiautomatic
Two additional buttons added for adjusting the current pass if you don’t want to use the mouse
Hectare counter added, one resettable counter and one total counter, reset via an assigned key.
Tramline Automation for FS25
This is my first script mod for FS25. Since the tramlines from Precision Farming did not always convince me. It automatically integrates into all implements that can be used as seeders.
The HUD can be controlled with the mouse, which can be activated via an assigned key.
Set Tramline Distance:
Here you set the working width of the sprayer or fertilizer spreader.
This can either be adjusted using two assigned keys or by clicking the plus and minus buttons with the mouse.
Rhythm:
Here you can see the number of passes required for one working width of the sprayer or fertilizer spreader.
In manual mode, the current pass can be adjusted with + and – if necessary.
I would like to reference a PDF by Webalizer, who created ProSeed for LS17.
The half pass should only be done on the second pass.
If you are using GPS and a half pass is required, it should look like this:
First pass normal. Starting from the second pass, set an offset of half the working width in the GPS menu. See the description further below under GPS Offset Mode.
Mode:
The active working mode of the tramline automation can be changed either via an assigned key or with the mouse by clicking on the selected mode.
Pause:
No tramlines will be created.
The counter is paused.
Always:
Tramlines are always active when the implement is lowered.
GPS:
Automatic track detection via GIANTS Steering Assist.
At the beginning, a reference track must be set. This can be done using an assigned key.
Manual:
Counting is done by raising/lowering the implement.
The symbol behind it indicates whether a tramline is currently being created or not.
GPS Offset:
Requirement: GPS mode
Since with an even rhythm number you must work with half the working width on the first pass, you can set the offset so the track does not start jumping.
This value can either be adjusted via an assigned key or with the mouse using the + and – buttons next to the rhythm.
In GPS mode, these buttons are repurposed to increase or decrease the GPS offset.
Track Width:
Here you can see the configured tramline track width.
This can be adjusted with two assigned keys or by clicking the plus and minus buttons with the mouse to match the track width of the crop care tractor, because smaller tractors have a narrower track width than larger tractors.
Buttons:
Tramline distance +/-: Increase or decrease the tramline spacing
CURSOR ON/OFF: Show or hide the mouse pointer
Tramline Mode switch: Switch the tramline mode
GPS reference Lane set: Sets the GPS reference track
reference -½ lane or reference +½ lane: Move the GPS reference track half the working width to the right or left
Track width +/-: Adjusts the track width from 1m to 6m

 

[FarmerBoy]

Thank you for providing the detailed changelog for version 1.2.0.0 of the Automatic Tramline System mod for FS25. It's great to see the new features and improvements that have been implemented in this version.

Here is a summary of the key changes and additions in version 1.2.0.0:

1. **Courseplay support**: A new mode "Courseplay" has been added to support Courseplay functionality.
2. **Enhanced Vehicle GPS support**: Another new mode "Enhanced Vehicle GPS" has been added to enhance Vehicle GPS support.
3. **Help page in ESC menu**: A help page has been added in the ESC menu where users can read about each mode's functionality and how it works, including a graphic for tramline distances.
4. **Two hectare counters**: Two hectare counters have been added, one of which can be reset. Users need to assign a key for resetting the counter.
5. **HUD improvements**: The HUD has been removed from the F1 display and added as its own HUD to address previous issues. The HUD can be moved, closed with the mouse, and reopened with a toggle key.
6. **Manual mode renamed**: Manual mode has been renamed to "Semiautomatic."
7. **Pass adjustment**: Two additional buttons have been added for adjusting the current pass without using the mouse.
8. **Tramline Automation**: The script mod for FS25 automatically integrates into all implements that can be used as seeders, enhancing the tramline system.
9. **Tramline Distance**: Users can set the working width of the sprayer or fertilizer spreader using assigned keys or mouse clicks.
10. **Rhythm and Mode**: Users can adjust the number of passes required for one working width and change the active working mode of tramline automation.
11. **Pause and GPS modes**: Users can set tramlines to be paused or always active when the implement is lowered. GPS mode allows for automatic track detection through GIANTS Steering Assist.
12. **PDF reference**: A PDF by Webalizer, creator of ProSeed for LS17, is mentioned for additional reference.
13. **GPS Offset and Track Width**: Users can set GPS offset for even rhythm numbers and adjust track width to match different tractor sizes, among other functions.

This in-depth information provides users with a comprehensive understanding of the new features and functionalities included in the latest version of the Automatic Tramline System mod for FS25.