FS25 Implements

Vaederstad Rexius1230 roller 12.3m working width 20KM/H working speed I am hereby making my Vaederstad Rexius1230 roller available to you. It has a working width of 12.3m. The working speed has been increased to 20 KM/H. The color of the base can be chosen. The color of the rollers can be changed. All colors can be changed to multicolor regardless of the assembly. The color of the rims can also be changed. If you have any problems or improvements, just let me know. Please respect my work, the roller may only be shared with the original link. The repair interval has been changed.

Harvester for potatoes, sugar cane, sugar beet, carrots, parsnips and beetroot Version 1.2.0.1 Bug fix: The mission tractor is now also delivered with tires. The ROPA Tiger 6S has been converted so that it can harvest sugar cane, potatoes, carrots, parsnips and beetroot in addition to sugar beet. A second, more powerful engine variant and a variable bunker volume (43, 100, 1000 cubic meters) are also installed. When the bunker is 95% full, a warning tone sounds so that you don’t accidentally drive into the fruit when the bunker is full. The angle of the unloading conveyor belt is adjusted so that it unloads higher and you can also use higher trailers. The unloading speed depends on the bunker volume, so that neither the small bunker...

Seeder SZP-3.6″VITA”: – Cost: 9 350 €; – Required power: 59 kW / 80 hp; – Working width: 3.6 m; – Working speed: 14 km/h; – Volume: 1,064 liters. – Choice of body color; – Hydraulic color selection; – Rim color selection; – Configuration of the footrests; – Configuration of the pointer flags; – Wheel configuration; – Dynamic hoses; – Leaves traces; – Gets dirty and washes; – The effect of aging. Coupling SPU-7: – Cost: 2,670 €; – Required power: 74 kW / 100 hp; – Working width: 7.2 m.; – Working speed: 13 km/h; – Frame color selection; – Rim color selection; – Dynamic hoses; – Leaves traces; – Gets dirty and washes; – The effect of aging. Coupling SPU-10: – Cost: 3,990 €; – Required power: 92 kW / 125 hp; – Working width: 10.8 m; –...

Hello everyone, here is the feedback from my optimization of the New Holland 9070L harvester that I had already done on FS22 – addition of the 9090L engine – addition of medium and wide mounts according to manufacturer specifications – modification of the steering angle to 90° (real angle of the machine) so it can exit and go directly to the next row without reversing – correction of the tank size which is 240L according to NH and not 270 as put by FS – fixed rear indicators which are white on the FS model and not orange as they should be V1.0.0.0: launch

Designed from International Harvester to bring you closer to the bottom line when it comes to the cutting edge versatility of a 1490 and 1590 mower conditioner. Engineered with the three point lift system, this system allows for lateral and vertical floating to ensure the header gets every last bit of stem off of the the root. Once the stem is cut, its travel throughout the system is gentle and handled with care. Pushed in by the reel, an auger moves the outboard hay towards the middle where it comes to reinforced rubber rolls that are machined to close tolerances, making sure every bit of stem is crimped and crushed to reel in less time drying but also cradled enough to make sure no leaf is lost. You can also adjust your swath with the...